Preferred language:   |
|
|
Category: Elektronik UpDownloads Datenblaetter
Sort downloads by:
Title( \ )Date(\)Rating(\)Popularity(\)
Resources currently sorted by:Title (Z to A)
 Voltage to current converter with INA2126 | | Description: | l LOW QUIESCENT CURRENT: 175mA/chan.
l WIDE SUPPLY RANGE: ±1.35V to ±18V
l LOW OFFSET VOLTAGE: 250mV max
l LOW OFFSET DRIFT: 3mV/°C max
l LOW NOISE: 35nV/�Hz
l LOW INPUT BIAS CURRENT: 25nA max
l 8-PIN DIP, SO-8, MSOP-8 SURFACE- MOUNT
DUAL: 16-Pin DIP, SO-16, SSOP-16 | | | Filesize: | 0 Bytes | | Added on: | 06-Jun-2007 | | Downloads: | 458 | | Category: | Elektronik UpDownloads Datenblaetter | | Details |
|
| Serial EEPROM DataSheet | | Description: | 2K I2C Serial EEPROM
Single Supply with Operation from 1.7V to 5.5V
for 24AA024/24AA025 Devices, 2.5V for
24LC024/24LC025 Devices
• Low-Power CMOS Technology:
- Read current 1 mA, typical
- Standby current 1 μA, typical
• 2-Wire Serial Interface, I2C™ Compatible
• Cascadable up to Eight Devices
• Schmitt Trigger Inputs for Noise Suppression
• Output Slope Control to Eliminate Ground Bounce
• 100 kHz and 400 kHz Clock Compatibility
• Page Write Time 5 ms Maximum
• Self-timed Erase/Write Cycle
• 16-Byte Page Write Buffer
• Hardware Write-Protect on 24XX024 Devices
• ESD Protection >4,000V
• More than 1 Million Erase/Write Cycles
• Data Retention >200 years
• Factory Programming Available
• Packages include 8-lead PDIP, SOIC, TSSOP,
DFN, TDFN and MSOP
• Pb-Free and RoHS Compliant
• Temperature Ranges:
- Industrial (I): -40°C to +85°C
- Automotive (E): -40°C to +125°C | | | Filesize: | 300 Bytes | | Added on: | 14-Oct-2009 | | Downloads: | 340 | | Category: | Elektronik UpDownloads Datenblaetter | | Homepage | Details |
|
| Op-Amp Circuit Collection | | Description: | All op-amps are differential input devices. Designers are accustomed to working with these inputs and connecting each to the proper potential. What happens when there are two outputs? How does a designer connect the second output? How are gain stages and filters developed? This application note will answer these questions and give a jumpstart to apprehensive designers. | | | Filesize: | 0 Bytes | | Added on: | 06-Jun-2007 | | Downloads: | 355 | | Category: | Elektronik UpDownloads Datenblaetter | | Homepage | Details |
|
Missing Pulse Detector  | | Description: | Missing Pulse Detector | | | Filesize: | 0 Bytes | | Added on: | 13-Dec-2003 | | Downloads: | 514 | | Category: | Elektronik UpDownloads Datenblaetter | | Details |
|
 Micropower, 10kHz to 1MHz Resistor Set Oscillator in SOT-23 | | Description: | ■ Supply Current: 12μA at 100kHz
■ <0.65% Frequency Accuracy (from 0°C to 70°C)
■ Frequency Range: 10kHz to 1MHz
■ One Resistor Sets the Oscillator Frequency
■ Single Supply: 2.25V to 5.5V
■ –40°C to 125°C Operating Temperature Range
■ No Decoupling Capacitor Needed
■ Start-Up Time Under 200μs at 1MHz
■ First Cycle After Power-Up is Accurate
■ 150Ω CMOS Output Driver
■ Low Profile (1mm) SOT-23 (ThinSOTTM) Package | | | Filesize: | 0 Bytes | | Added on: | 13-Dec-2003 | | Downloads: | 693 | | Category: | Elektronik UpDownloads Datenblaetter | | Details |
|
| FM Stereo Demodulator | | Description: | Integrated Circuit FM Stereo Demodulator
Features:
Requires No Inductors
Low External Part Count
Only Oscillator Frequency Adjustment Necessary
Integral Stereo/Monaural Switch 75mA Lamp Driving Capability
Wide Dynamic Range: 0.5 to 2.8V(p–p) Composite Input Signal
Wide Supply Range: 8V to 14V
Excellent Channel Separation Maintained Over Entire Audio Frequency Range
Low Distortion: Typically 0.3% THD at 560mV (RMS) Composite Input Signal
Excellent SCA Rejection | | | Filesize: | 0 Bytes | | Added on: | 12-Dec-2003 | | Downloads: | 390 | | Category: | Elektronik UpDownloads Datenblaetter | | Details |
|
| BASIC Stamps on a MAC | | Description: | Programming a BASIC Stamp 2, 2e, 2sx, or 2p on a Power Mac | | | Filesize: | 0 Bytes | | Added on: | 15-Feb-2005 | | Downloads: | 574 | | Category: | Elektronik UpDownloads Datenblaetter | | Details |
|
| 500mA Li-Ion Charger | | Description: | 500mA Li-Ion Charger with Integrated 600mA Synchronous Buck Converter
The EUP8080 is a complete constant-current/
constant-voltage linear battery charger for a single-cell
4.2V lithium-ion battery with an integrated 600mA
synchronous buck converter. It is specifically designed to
work within USB power specifications.
The battery charger offers an integrated pass device,
reverse blocking protection, high accuracy current and
voltage regulation, charge status, and charge termination.
The charging current is programmable via external resistor
from 15mA to 500mA. In addition to these standard
features, the device offers current limit, thermal protection,
and soft-start. The EUP8080 integrates a synchronous buck converter
that is powered from the BAT pin internally. It has an
adjustable output voltage and can deliver up to 600mA of
load current. The buck converter also features low-current
high-efficiency Power Save and low output ripple PWM
mode operation that can be selected by the MODE pin. | | | Filesize: | 0 Bytes | | Added on: | 04-May-2009 | | Downloads: | 687 | | Category: | Elektronik UpDownloads Datenblaetter | | Details |
|
Select page 1 2 [ Next >> ]
|
|
|
|
